10GBASE-SR is a short-range optical fiber transmission standard that can operate at 10 Gb/s over distances of up to 300 m. It is a form of optical fiber cable that uses the 850 nm wavelength and is designed for applications in which the distance between devices is less than 300 meters.
It can be used to connect network interface cards (NICs) to network switches and routers or other network equipment. SFP modules convert an electrical signal into an optical signal or vice versa. The working principle of this module is converting the electrical signal from the NIC into a light signal which travels on the fiber optic cable, then transforms back into an electrical signal once it reaches its destination. 10GBASE-SR is a type of fiber optic module that can be installed in an SFP slot. They are used for transmitting data at 10 gigabits per second over long distances. The working principle of this module is based on the principle of optical transmission and the use of single-mode fiber. The signal is transmitted through one core optical fiber, and the signal wavelength is 1310nm or 1550nm, with a maximum transmission distance of 10 km.
Contents
What is SFP Module?
An SFP module is a small, standardized optical module that can be inserted directly into an SFP port. It is used to connect two optical fibers together.
The SFP module contains a transmitter and receiver, which are used to convert the electrical signal from the network device into an optical signal. The fiber optic cable transmits the data as light pulses through glass or plastic strands.
The SFP module is a small device that sits on the network card, which enables it to communicate with the fiber optic cable. It can be installed at either end of the fiber optic cable, and it is used to transmit data across long distances by converting electrical signals into light pulses.
The 10GBASE-SR Work Principle
The 10GBASE-SR work principle is a type of serial transmission that transmits data in the form of a series of frames.
It is the most common type of Ethernet transmission and it is used to connect computers to LANs, as well as computer networks to other networks.
10GBASE-SR is a high-speed, serial transmission technology that is used in computer networking. It has a data rate of 10 Gbps, which is 10 billion bits per second (10 Gbit/s). This technology uses the Serial Rapid I/O interface.
It uses parallel transmission to transmit data over multiple channels at the same time. Parallel transmission requires more bandwidth and transceivers than serial transmission to send data at the same rate over the same distance.
Conclusion: 10GBASE-SR And Future Development Of The Technology
10GBASE-SR is a new and improved technology that will be the future of high-speed networks. The 10GBASE-SR was able to handle more data traffic than the previous generation. It also has a greater reach, which means it can cover more physical distance with less equipment. These improvements will make 10GBASE-SR even more useful in the future and lead to its widespread adoption.
In conclusion, 10GBASE-SR is a very promising technology that can help to push the boundaries of the future of networking. With this technology, we are going to see more and more innovation in the coming years. The future of networking is bright! If you want to know more about the 10GBASE-SR optical module, please contact QSFPTEK via sales@qsfptek.com.
